Vacuum Ejectors - PumasAutomation & Robotics Pte Ltd

HFV/HFV-25M

webadmin — Fri, 10 Feb 2023 09:20:14 +0000

Products

HFV/HFV-25M

High vacuum flow

Application examples
Small object (pills, chips, bearings)
Dry powder, cereals
Transistor Abrasion Process

The post HFV/HFV-25M first appeared on PumasAutomation & Robotics Pte Ltd.

MCA

webadmin — Fri, 10 Feb 2023 09:19:19 +0000

Products

MCA

Light Weight – Compact design with resin body.
In-line attachment – Easy attachment. Connect directly tube to push-in ports.
Pad direct mounting – Direct mounting possible with male threaded port type selection.

The post MCA first appeared on PumasAutomation & Robotics Pte Ltd.

MCV

webadmin — Fri, 10 Feb 2023 09:18:42 +0000

Products

MCV

Plastics body.
Push-in connecter mounted.
Compact size : 78*42.5mm.
Lightweight.

The post MCV first appeared on PumasAutomation & Robotics Pte Ltd.

MC10

webadmin — Fri, 10 Feb 2023 09:18:08 +0000

Products

MC10

Low air consumption.
High flow ejector that is comparable to Vacuum Pump.
Large vacuum flow can be ensure with very low supply pressure 0.3MPa can achieve 260L/min.
Easy mounting with push-in connector.

The post MC10 first appeared on PumasAutomation & Robotics Pte Ltd.

MC22

webadmin — Fri, 10 Feb 2023 09:17:25 +0000

Products

MC22

Light and Compact, 20mm width, compact solenoid valve.
Low mass.
Short cycle times for high speed pick and place application.
Manifold option. (up to 8 units)

The post MC22 first appeared on PumasAutomation & Robotics Pte Ltd.

SC3 Series

webadmin — Fri, 10 Feb 2023 09:16:51 +0000

Products

SC3 Series

Convum Medium Size Smart Vacuum Ejector Unit

Multi-stage nozzle is available
The combination with or without the filter and the sensor can be selected
Mounted with the check valve that can be used to release workpieces without wasting blow-off air
Solenoid valve with self-holding function is available.
Air consumption will be dramatically reduced with the use of the energy-saving sensor.
The connector with supply port and vacuum port is easy assemble and easy disassemble.

The post SC3 Series first appeared on PumasAutomation & Robotics Pte Ltd.

SC2 Series

webadmin — Fri, 10 Feb 2023 09:16:05 +0000

Products

SC2 Series

Vacuum response time 20ms (30% reduce ,compared to other CONVUM) *Condition: 05HS type, up to 60kPa, tube:φ4/φ2.5X50mm.
Compact design
Volume: 40% reduce, compared to MC42
Digital vacuum sensor mountable
Can be mounted on manifold up to 8 units

The post SC2 Series first appeared on PumasAutomation & Robotics Pte Ltd.

SC1 Series

webadmin — Fri, 10 Feb 2023 09:15:23 +0000

Products

SC1 Series

Energy – Savings. Air consumptions 50% reduce compare to MC52 in the case of X/B nozzle.
Space-saving, 10mm width body.
Very low supply pressure: 0.18MPa, achievement: -83kPa.
Filter mounted – prevent dust into the part.
Sensor mounted- confirming the suction and control the solenoid valve.
Self-holding solenoid valve choice available- Keeping vacuum while power failure
Common exhaust choice available – Using in the clean room

The post SC1 Series first appeared on PumasAutomation & Robotics Pte Ltd.

CV Series

webadmin — Sun, 06 Mar 2022 02:54:19 +0000

Products

CV Series

CV-10HS

The post CV Series first appeared on PumasAutomation & Robotics Pte Ltd.